We would like to wish all of our members and viewing guests a happy and cheerful; Columbus Day in United States and Thanksgiving Day in Canada From the Leadership and friends in our Network ! You can view the full announcement by following this link: http://canampreppers.net/forum/index.php?topic=2869.0 Regards, The CanAmPreppers Team. ps. we are always looking for others; preppers, homesteaders, survivalist self reliant and self reliance types of people from the USA and Canada
Tag Archives: self reliance
wild_E & CanAmPreppers channel
So after a 3+ year absence due to no good editing software, watch for more videos from me on behalf of CanAmPreppers.net
I have about 10-15 to upload from the last few years, then another 20+ are planned and in the works right now.
Hoping this is another venue to get some new members as well as more views to the channel
ps. we also do videos on request!
So if you like this sort of thing, subscribe here for updates and visit the forum at CanAmPreppers.net where we talk about thia and a whole lot of other things.
back online today after yet another electronics issue with my laptops 12v power supply. This is not a how to do electronics repairs but is a warning that you need to have some supplies on hand as well as in an extended kit for long term Self Reliance sustainability.
My list of tools;
box cutter / utility knife
pliers needle nose
pliers regular blunt end
magnifying glasses x3 power
small screwdriver set
black utility/electrical tape
solder with flux built in
Soldering Iron – Need to buy one!!!
(I have a soldering Gun, not as useful and takes a lot more power)
flat large surface to work on, ymmv there
Last month the 12v power cord broke near the end that goes into the computer. This is a multi power, multi end power supply so the ends pop off too easy. I have taped on the end permanently. The cord broke due to the fact that the power supply on this laptop is on the left side, my main vehicle 12v power supply is on the right in the dash. This makes the cord always bend to the right in order to be plugged in.
The cord from the power pack to the laptop is a coaxial type of power cord with the negative wires around the inside positive wires. This finding this out took a few attempts at cutting, moving wires, pealing the inside positive wire without hurting the outside wires. x3 power close up glasses were used instead of a magnifying glass so that both hands were free to be in play.
First I joined the inside positive wires, soldering them together though had to do this a few times. The best I found was to add extra flux even though the solder I had on had has flux built in, maybe it had to due with the size of the wire and not wanting to get it too hot as the end was so close.
Next wrapped the wire up in tape, black electrical tape, put an extra layer or two to be sure!
Next did the same with the outside negative wires, same thing extra flux worked better. Again, overwrapped with the electrical tape, just to make sure!
Then covered both wires together, made sure the electrical tape was affixed to the wires a good two inches up from the cut and repair, did I mention that I wanted to be sure!
Voila, plugged the 12v into a socket to see if the wire repair or the power pack would heat up, left it on with no laptop connected for about 30 minutes. With some trepidation, I unplugged the 12v socket, attached the laptop, then plugged it back in. So far so good, whewww… Then turned the laptop on, kept checking for heat and smoke, ready to unplug at the first sign of either!
Now, two days ago, bam the 12v plug end, melted, melted so tight that it crushed the inside fuse or the fuse broke, causing the outside casing to melt. Does not matter either way, there was trouble. I unplugged the 12v power pack took a quick look and left it for the morning.
Note: do not get angry and throw the cord to the phone against the wall! In the morning you now have another soldering job!!
Newest fix; luckily I had an extra end for the power pack to the 12v socket kicking around. After taking the somewhat melted male socket apart, there was no way to fix was was left. Looking at the never used 12v cord, making a quick cut with the side cutters close but not against the adapter where it goes into the 12v power pack, I was committed. Thinking in advance, cutting close to the end connector now has the original cord slightly less than double the length, much better!
Snipping close but not against the melted male socket (might still have some usable parts there) I laid out the wires to be stripped with the wire strippers/cutter.
Next which is good to know, this side the wires are normal cord style, positive and negative side by side, so much less stress and hassle! (relatively speaking of course)
Wires stripped back, positive first, soldered and fluxed together, wrapped excessively with black electrical tape.
Next negative wires done the same, overwrapped paying attention that there were now positive wires peeking through or mixed in with the negative wires!
All, overwrapped, up and down about 3 inches either side of the break. Overwrapped, making sure, I did mention this is my laptop cable right!
mouse chewed threw cables from solar panels to wire clips,
broken 12v cables that were attached to the 12v starting battery to a 4oo watt inverter
older emergency 12v battery starting wires, old ends taken off, wired brushed up, reconnected to newly exposed wire and soldered on for better connectivity and power transfer.
So, why is this important post SHTF;
no laptop for info
no solar panels
more mice to chew things
soldering iron draws less power
Soldering gun, has a nice light, ya but draws a lot more power
– also you need to hold that little trigger the whole time and your finger goes to sleep!
Get used to doing things outside of your comfort zone now!
So, Helped to set up a Preparedness and Bushcrafter meeting that is on the 20-21 July in Huntsville Ontario
info to be found through here
I will be giving a show and tell on Fire/Stove/Shelters there are a lot of presenters as well as door prizes, networking and just a general get together with like minded people.
Bit of a drive for the USA Folks but, we have ONE coming as of now 🙂
Look forward to seeing some of you pop by
Canadian and American Prepper, Preparedness, Self Reliant, Bushcraft, Homesteader forum